How to Fix Drag on Xbox One Controller

As an Amazon Associate I earn from qualifying purchases.

Do you ever feel like your Xbox One controller is dragging? Well, you’re not alone. In fact, it’s a pretty common problem.

But don’t worry, there’s a fix! Here’s a quick and easy guide on how to fix drag on your Xbox One controller.

 

Check the batteries

The first thing you’ll want to do is check the batteries in your controller. If the batteries are low, that can cause drag on your controller. You can use AA batteries or the Xbox One Play and Charge Kit to power your controller.

If your batteries are charged, and you’re still experiencing drag, the next step is to check the Xbox One controller firmware. You’ll need to connect your controller to your Xbox One console using a USB cable to do this. Once it’s connected, open the Settings menu and go to Devices & Streaming > Accessories. Select your controller and then select Update firmware.

If there’s an update available, it will begin installing automatically. Once it’s finished, reboot your Xbox One console and try using your controller again. If you’re still having issues, move on to the next step.

 

Check the controller’s firmware.

The Xbox One controller may have a hardware issue that is causing the dragging. You can check the controller’s firmware version to see if it needs to be updated.

To do this, follow these steps:

1. Press the Xbox button on the controller to turn it on.

2. Press and hold the bind button for three seconds. The bind button is the small button located in the top left corner of the controller.

3. Press and release the connect button on the controller’s top. The controller will vibrate and then enter pairing mode.

4. Open Settings on your Xbox One console and go to Devices & Accessories. Select your controller and the Firmware version in the Quick Navigation panel. If an update is available, follow the prompts to install it.

Check for controller interference.

One potential cause of controller interference is the presence of other wireless devices that use the 2.4 GHz frequency range. These include:
-Microwave ovens
-Cordless phones
-Bluetooth devices
-Wireless routers
-Some baby monitors

To determine if another wireless device is causing interference, try turning off all other devices in the area and see if the issue persists. If it does, try moving the controller and console closer together. If that doesn’t work, try using a different controller.

Here are 5 tips to Fix Drag on Xbox One Controller

 

Check your console’s settings.

The first thing you should do if your Xbox One controller drags is to check the console’s settings. Specifically, you’ll want to make sure that the “Constrain Mouse Cursor” setting is turned off. This setting can be found in the “Ease of Access” section of the console’s settings menu.

Perform a hard reset

A hard reset is when you press and hold the Xbox button on the console for about 10 seconds, then release it. Doing this resets the controller’s connection to the console. You can do this by pressing and holding the Xbox button on the front of the console for about 10 seconds.

Check for physical damage.

Before trying any other troubleshooting steps, it’s important to rule out any physical damage to your controller that may be causing the issue. Check the controller for any obvious damage, such as cracks, scratches, or missing buttons. If there is physical damage to the controller, it will need to be repaired or replaced.

If there is no physical damage to the controller, the next step is to try resetting it.

Try a different controller.

If you’re having trouble with your Xbox One controller and it’s not working properly, you can try a few things to fix the issue. One of the first things you can try is using a different controller. If you have another Xbox One controller, try using that one to see if it works properly. If it does, then the issue is with your first controller, and you’ll need to get it fixed or replaced. You can try resetting your current controller if you don’t have another controller. To do this, press and hold the Xbox button on the controller for about 10 seconds. This will cause the controller to reset and hopefully fix any issues you’re having.

Contact Xbox support

If your Xbox One controller is experiencing constancy drag, there are a few things you can try to fix the problem. First, check to see if the controller is properly paired with the console. If it is, try restarting your Xbox One. You may need to update your controller firmware if that doesn’t work. To do this, connect your controller to your Xbox One with a USB cable and then go to “Settings -> Devices & accessories.” Select your controller and then select “Update.”

Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.

Kevin Partin
We will be happy to hear your thoughts

Leave a reply

How to Xbox
Logo